PDA

View Full Version : measuring pH



lindi
January 24th, 2011, 04:22 PM
So my digital pH meter (Hanna Instruments) just arrived- got it calibrated, etc. But I'm wondering...it seems like I will need lots of vaginal fluids to actually get a reading...what's the best way to use of one these? Advice ladies?

Viene
January 24th, 2011, 04:38 PM
If you don't get a lot then you could put in a diva cup or instead cup for a couple hours. You can also try squeezing a little out with 2 fingers. A tiny amount can still be measured.

lindi
January 24th, 2011, 05:39 PM
does it matter what it touches? would my fingers change the pH?

nuthinbutpink
January 24th, 2011, 06:45 PM
http://www.scielo.br/pdf/bjmbr/v34n6/3792m.pdf

Read this about air exposure to CM and its affect on pH. As long as you are getting up there and getting CM at your cervix and not waiting too long, it should be accurate.

babydust
January 29th, 2011, 10:55 AM
Just reach up and get some cm, and if you have the white hannah, put it on the bulb, if you have the red one you'll need a q tip to put the cm on. I like the white one way better, even though it breaks more easily, it's much easier to use in my opinion